Daimler V8 Accelerator cable replacement
Get quotes for your Daimler V8 from specialists near you
Australia's #1 booking site for car services & car repairs
Book now, pay later Interest-free payments
Transparent prices no surprises
*Available at select service providers. T&Cs apply.
Daimler V8 Accelerator cable replacement
Daimler V8 accelerator cable replacement
Most modern Daimler V8’s now use drive-by-wire technology instead of mechanical systems. This includes the accelerator cable, with vehicles now utilising electronic throttle controls to replace mechanical linkages. However, the accelerator cable is not completely dead just yet, and there are still plenty of Daimler V8’s on the road with this venerable mechanical component.
The accelerator cable is a braided, flexible, metal cable that can get damaged or fail over time. If it does fail, you may notice a change in acceleration and there may be a delay when you push the accelerator pedal down on your Daimler V8. If the cable breaks for any reason you won’t be able to accelerate at all.
An accelerator cable is a fairly simple device. A cable runs from the accelerator pedal to a spring-loaded linkage on the throttle body. When a driver pushes the accelerator pedal down, the cable moves the linkage on the throttle body. This opens the valve on the throttle body to allow more air to flow into the Daimler V8’s engine. The position of the foot on the accelerator pedal determines the airflow and the amount of fuel going through the injectors to provide the optimal air/fuel mixture for engine combustion.
Ensuring you can accelerate when required is actually a pretty important safety issue - you may need to move quickly to avoid an accident - and if the accelerator cable on your Daimler V8 breaks, you could find yourself in trouble. If it does break, at the very least you’ll find yourself stuck at the side of the road summoning a tow truck.
