MG ZS Brake master cylinder replacement
Get quotes for your MG ZS from specialists near you
Australia's #1 booking site for car services & car repairs
Book now, pay later Interest-free payments
Transparent prices no surprises
*Available at select service providers. T&Cs apply.
MG ZS Brake master cylinder replacement
When do MG ZS brake master cylinders need to be replaced?
The brake master cylinder on your MG ZS is a hydraulic pump that converts your brake pedal pressure to hydraulic pressure. This pressure pushes brake fluid through the brake lines and hoses, forcing brake pads to squeeze onto the brake rotor and/or force the brake shoes outwards against the brake drum.
A master cylinder is under pressure and overtime with normal wear and tear it can fail and require replacement. The usual culprit of failure are the seals inside the master cylinder, they can wear out and create leaks in the MG ZS's brake system.
Some modern vehicles will have sensors that detect brake fluid level drops or a change in pressure and warn you of an issue by illuminating the brake light in the instrument panel. Otherwise, you may notice the MG ZS's brake pedal feels spongy or there is no pedal resistance and it goes straight to the floor.
If you detect a problem with the brake master cylinder it is not safe to drive as your brakes won't be working properly and may not work at all. If the master cylinder has failed the MG ZS is deemed inoperable and the brake master cylinder will need to be replaced before it can be driven again.
As a critical component on your MG ZS, it’s best to have a professional complete the job, which is why AutoGuru will come in handy.
