Suzuki SX4/SX4 Classic Distributor o-ring replacement
Get quotes for your Suzuki SX4/SX4 Classic from specialists near you
Australia's #1 booking site for car services & car repairs
Book now, pay later Interest-free payments
Transparent prices no surprises
*Available at select service providers. T&Cs apply.
Suzuki SX4/SX4 Classic Distributor o-ring replacement
Suzuki SX4/SX4 Classic distributor o ring replacement
If your early model or classic Suzuki SX4/SX4 Classic has been leaking oil from the base of the distributor, it’s usually a sign that the distributor o-ring has failed and needs replacing. Because the distributor shaft enters the engine, a seal is required to stop oil from exiting the Suzuki SX4/SX4 Classic’s engine and to stop contaminants from entering.
Since the Suzuki SX4/SX4 Classic’s distributor is responsible for ‘telling’ the spark plugs when to fire, the timing needs to be precise. If a distributor moves out of alignment, it can create major timing issues and cause damage to the engine. When the spark plugs ignite the fuel at the wrong time, all other elements are no longer in sync and clean and efficient combustion can’t be achieved. This is when engine damage can occur on a Suzuki SX4/SX4 Classic.
If the o-ring fails, it will need to be replaced as soon as possible. This can cost around $50 to $160 depending on the Suzuki SX4/SX4 Classic and how easy it is to access the distributor. Leaking oil around the engine can create issues for electrical connectors and components inside the Suzuki SX4/SX4 Classic’s engine bay. Also, if the distributor is not sealed properly it can cause engine damage. Best to have it fixed as soon as you can.
