LDV T60 Horn replacement
Get quotes for your LDV T60 from specialists near you
Australia's #1 booking site for car services & car repairs
Book now, pay later Interest-free payments
Transparent prices no surprises
*Available at select service providers. T&Cs apply.
LDV T60 Horn replacement
How much does a LDV T60 horn replacement cost?
The LDV T60’s horn is a warning device which, by law, is only allowed to be used to warn other road users or animals of the LDV T60’s approach and possible imminent danger. It can be used in conjunction with an anti-theft device or alcohol ignition interlock. A road vehicle must be equipped with a functioning horn and it should not be used for anything other than its purpose, otherwise you could be fined.
The horn activation point, or switch, is on the LDV T60’s steering wheel. Since it is a warning device to be used in an emergency situation only it is within easy reach and its very quick to activate. It only takes a second to strike the steering wheel. The actual warning sound comes from the front of the LDV T60, which is where the horn is found.
When the horn switch is pressed in the cabin it activates a relay which allows power to flow to the horn. On modern LDV T60’s it generates a beep sound as the warning. There will be at least one horn per vehicle although some LDV T60’s have two horns that emit different frequencies, or notes, as this is more obvious in a noisy environment. The exterior of a horn can be small enough to fit in the palm of the hand and is usually made of plastic and/or metal. A horn will produce around 109-112 decibels of sound.
A plunger’s rapid back and forth movement flexes and vibrates the diaphragm, creating the sound you hear when pressing the LDV T60’s horn switch on the steering wheel.
A working warning device on a LDV T60 is a requirement. You never know when it may be needed - you might need to shoo some cows off the road on your next country drive. If your horn is sounding hoarse then best get it replaced as soon as possible.
