Austin 1300 Scratch repair
Get quotes for your Austin 1300 from specialists near you
Australia's #1 booking site for car services & car repairs
Book now, pay later Interest-free payments
Transparent prices no surprises
*Available at select service providers. T&Cs apply.
Austin 1300 Scratch repair
Should I get the scratches repaired on my Austin 1300?
The paintwork on your Austin 1300 isn’t just there to make it look good, it also provides protection to the metal underneath it. Austin 1300 paintwork is usually three separate layers: The primer, the colour base coat and clear coat, which is the main protective layer. The paintwork is designed to stop rust and other environmental contaminants from penetrating and damaging the panels, and these outside elements can often scratch the paintwork when they come into contact with your Austin 1300.
Scratches can vary in depth, from a light scratch in the clear coat to deep scratches that penetrate to the primer or bare metal underneath. Scratch repair removes or lessens the look of these scratches, depending on the severity of the scratch and the location on your Austin 1300.
Clear coat scratches are the easiest to repair, often only requiring the clear coat on your Austin 1300 to be polished to level out the scratch, rendering it invisible. Deeper scratches that strike through the clear coat down to the base layer or primer are more difficult to repair, often requiring paint to be built up into the scratch, before being flattened down with sandpaper and then polished to bring back the shine. If the scratch is severe, repainting the panel may be the only option to completely remove the scratch, returning the paintwork on your Austin 1300 back to factory condition
Depending on the severity of the scratch and the location on your Austin 1300, a simple polish to remove small scratches can start around $150 and full repairs of a panel including repainting in your Austin 1300’s factory colour can add up into the thousands.
