Renault Clio II/Clio Campus/Clio Storia Transmission mount replacement
Get quotes for your Renault Clio II/Clio Campus/Clio Storia from specialists near you
Australia's #1 booking site for car services & car repairs
Book now, pay later Interest-free payments
Transparent prices no surprises
*Available at select service providers. T&Cs apply.
Renault Clio II/Clio Campus/Clio Storia Transmission mount replacement
Do I need to replace my Renault Clio II/Clio Campus/Clio Storia transmission mounts?
The transmission in your Renault Clio II/Clio Campus/Clio Storia is the component that harnesses the engine’s power and turns it into usable and controllable energy.
For it to do so, the transmission must be securely fastened in place. One or more transmission mounts keep the transmission firmly in place. The purpose of a transmission mount is to keep your transmission secured in your car and well-supported while allowing for slight motion.
The transmission mounts experience a lot of stress, especially under hard acceleration. Many transmission mounts will last your Renault Clio II/Clio Campus/Clio Storia’s lifetime, although they can deteriorate with time and under harsh operating conditions.
On rear-wheel-drive models, the transmission mount is typically a cradle underneath the extension housing. While on front-wheel-drive and AWD cars, the transmission mount commonly secures the transmission with an arm on top-mounted to the vehicle frame. The ends are bolted so there’s no chance of excessive motion that could cause problems.
Transmission mounts are usually cast from either aluminium or pressed from steel and reinforced for strength. A rubber or polyethene bushing is used at the mounting point, and often where the mount attaches to the car’s body or frame, to allow for slight movement and isolate vibration and noise.
Renault Clio II/Clio Campus/Clio Storia's operated in stop-and-go conditions more frequently will require transmission mount replacement more often. When the transmission mount has cracked or bent, or if the mount’s bushing has deteriorated, the transmission mount will need to be replaced.
Symptoms of a failing transmission mount:
- Knocking noise under your car on acceleration
- Increased cabin noise while the engine is running
- Vibration through the steering wheel or felt in the cabin while driving
Having your transmission mount replaced at the first signs of failure gives you confidence that your Renault Clio II/Clio Campus/Clio Storia will work properly in any driving conditions.
Driving your Renault Clio II/Clio Campus/Clio Storia with a broken or worn transmission mount can cause drivability issues as well as possibly damage the transmission or engine case due to excessive torque and movement. This can be aggravating and exponentially increase repair costs.
It’s possible for the transmission mount on your Renault Clio II/Clio Campus/Clio Storia to wear out over time and require replacement at some point in your car’s life – that’s when AutoGuru comes in handy!