Peugeot Turbocharger boost control solenoid replacement
Get quotes for your Peugeot from specialists near you
Australia's #1 booking site for car services & car repairs
Book now, pay later Interest-free payments
Transparent prices no surprises
*Available at select service providers. T&Cs apply.
Peugeot Turbocharger boost control solenoid replacement
Do I Need to Replace My Peugeot Turbocharger Boost Control Solenoid?
If your Peugeot has a turbo then it will also have a turbocharger boost control solenoid. A part which is important in keeping the turbo and engine running smoothly.
There are generally 3 ways your Peugeot boost control solenoid can fail, it can be an electrical fault (fuse, connector etc.) a vacuum fault (leaking hose etc.) or an internal fault.
The Peugeot's boost control solenoid controls the amount of boost pressure by “bleeding off” a measured amount of air to reduce the pressure in the hose that feeds the wastegate to allow for better boost control.
Generally, the boost control solenoid will need to be replaced if the issue is internal however if it is an electrical or hose issue then they can usually be repaired fairly easily and inexpensively.
However, when the turbocharger boost control solenoid is faulty the Peugeot's check engine light will come on under sustained acceleration and if it's not replaced it will cause added pressure on the turbo and engine which can result in much higher repair costs, it's a good thing AutoGuru is there to help.
Peugeot Models
- Peugeot 2008
- Peugeot 205
- Peugeot 206
- Peugeot 206 CC
- Peugeot 207
- Peugeot 207 CC
- Peugeot 208
- Peugeot 3008
- Peugeot 306
- Peugeot 307
- Peugeot 307 CC
- Peugeot 308
- Peugeot 308 CC
- Peugeot 308 SW
- Peugeot 4007
- Peugeot 4008
- Peugeot 405
- Peugeot 406
- Peugeot 406 Coupe
- Peugeot 407
- Peugeot 407 Coupe
- Peugeot 5008
- Peugeot 504
- Peugeot 505
- Peugeot 508
- Peugeot 605
- Peugeot 607
- Peugeot Boxer III
- Peugeot Expert III
- Peugeot Expert IV
- Peugeot Partner
- Peugeot RCZ
